How Catalytic Converters Are Recycled: Process, Metals Recovered & Where It Goes
Catalytic converter recycling is the process of cutting open a used converter, milling its ceramic core into powder, testing that powder for platinum, palladium and rhodium, and sending it to a refiner who separates the metals for reuse. The steel shell is recycled separately. In October 2026, U.S. buyers quoted scrap converters from about $5 for aftermarket units to more than $1,000 for the richest factory units. This guide follows a converter from the scrap yard to the refinery, shows which metals come out, explains what sets the price, and covers the paperwork you need to recycle a catalytic converter legally.

James Mitchell
Senior Automotive Writer
12+ years writing clear, practical guides on vehicle maintenance and emissions systems.
How Does Catalytic Converter Recycling Work Step by Step?
Catalytic converter recycling works in seven stages: collection, grading, decanning, milling, sampling, assay and refining. The steel shell is separated and sold as scrap steel, while the ceramic core is ground into a uniform powder, tested for platinum, palladium and rhodium, and sold to a smelter or refiner that extracts the metals.
Here is the sequence a typical converter follows after it leaves the car:
- Collection: repair shops, dismantlers and individual sellers deliver used converters to a licensed scrap buyer.
- Grading: the buyer identifies the unit by its stamps, serial numbers and shape, because precious metal loading differs by vehicle, engine type and whether the unit is a factory (OEM) or aftermarket part.
- Decanning: a machine cuts open the steel shell to release the ceramic honeycomb inside, and the steel goes into the scrap steel stream.
- Crushing and milling: the ceramic is ground into a fine powder and blended so every sample represents the whole batch.
- Sampling: two or more samples are drawn from the blend for testing.
- Assay: a lab measures the platinum, palladium and rhodium content, using XRF for quick screening and ICP analysis for precise results.
- Refining: a smelter or refiner separates the metals, and the purified platinum, palladium and rhodium are sold back into the market.
What Happens During Decanning and Milling?
Decanning is the removal of the steel shell. A machine cuts the shell open and frees the ceramic honeycomb that carries the precious metals. The honeycomb is then milled into powder and blended, because only a fully mixed batch gives a sample that reflects the real metal content.
Moisture control matters in catalytic converter recycling because the sample has to be dry and uniform. Wet powder, soil, rust or contaminated material can distort the test results and lead to underpayment or disputes. This is also why buyers pay on assay results rather than on weight or appearance, since nobody can see platinum group metals with the naked eye.
How Do Assay Tests Measure the Metal Inside?
Assay tests measure how much platinum, palladium and rhodium sits in the milled powder, usually in parts per million. XRF gives a fast reading and ICP gives laboratory grade precision. Large lots are often paid in two stages: an advance based on the buyer’s own analysis, then a final settlement after an outside lab confirms the result.
A detailed assay report typically lists gross and net weights, metal concentrations, converter counts, the metal prices used, processing fees and the final payment. Vague pricing or a refusal to share assay data are warning signs when you deal with a processor.
How Do Refiners Separate the Platinum, Palladium and Rhodium?
Refiners use heat, chemistry or both. In a smelter, the powder is melted with a collector metal such as copper that captures the precious metals. Wet chemical steps then dissolve, separate and purify each metal. No process captures a perfect 100 percent.
Umicore’s plant in Hoboken, Belgium, is a well known example. Its smelter pulls precious metals into a copper bullion, the copper is leached out, and the remaining residue goes to a precious metals refinery. Refiners such as Johnson Matthey also process spent autocatalysts, and the work generally combines high temperature (pyrometallurgical) and wet chemical (hydrometallurgical) methods. None of this can be done at home, which is why the scrap yard is only the first stop in catalytic converter recycling.
What Metals Are Recovered From a Catalytic Converter?
Recyclers recover three precious metals, platinum, palladium and rhodium, plus the stainless steel shell and the ceramic carrier. Gasoline converters lean on palladium, diesel units often use more platinum, and rhodium is usually the most valuable metal per ounce. Exact blends vary widely by manufacturer and emissions standard.
If you are not yet familiar with what a catalytic converter does, what a catalytic converter is and how it works covers that in full detail. The table below focuses on what comes out of the converter at the end of its life.
| Material | Role inside the converter | What happens to it in recycling |
|---|---|---|
| Platinum | Helps oxidize carbon monoxide and hydrocarbons, used heavily in diesel units | Refined and sold for new catalysts, electronics and other industrial uses |
| Palladium | Oxidizes pollutants in gasoline converters | Refined and sold back to catalyst makers and industry |
| Rhodium | Reduces nitrogen oxides, the scarcest and usually priciest of the three | Refined and sold at a price per ounce far above platinum or palladium |
| Stainless steel shell | Housing that holds the core and connects to the exhaust | Removed at decanning and recycled as scrap steel |
| Ceramic honeycomb | Carrier coated with the precious metal washcoat | Milled for assay and refining, with leftover material handled as processing residue |
| Oxygen sensors | Sensors that read exhaust oxygen, sold alongside converters | Bought separately by weight, quoted at about $3 per pound in October 2026 |
How Much Precious Metal Is in One Converter?
A typical passenger car converter holds only a few grams of platinum group metals in total, while large truck units hold more. The exact amount depends on make, model, engine type, converter age and whether the unit is OEM or aftermarket.
In catalytic converter recycling, aftermarket units often carry only a fraction of the factory load, which explains their flat, low quotes. Hybrid converters can carry higher loads to make up for lower average exhaust temperatures. Because the metal is spread through a thin washcoat, even two units from the same model year can assay differently.
Can All the Metal Be Recovered?
No. Even advanced smelting cannot capture every gram of platinum group metal, because small losses occur during heat treatment, mechanical processing and chemical refining. Recovery rates can be very high, but never a perfect 100 percent, and a poorly cut or damaged converter loses metal before it even reaches the processor.
Where Does a Recycled Catalytic Converter Go After the Scrap Yard?
A scrap yard usually passes converters, or the milled powder from them, to a core buyer, processor or toll refiner, who ships the material to a smelter. The refined platinum, palladium and rhodium then return to the market as new metal that manufacturers can buy.
Most used converters end up at a scrap yard first in catalytic converter recycling, but a yard only grades the unit and pays a set price per unit. A toll refiner pays on the assay of the actual material, which is why bulk sellers who recycle catalytic converter lots prefer to work with processors directly and why some refiners require large batches. Local yards vary in price depending on how closely they work with processors and how well they understand the metals market.
What Are Recycled Platinum, Palladium and Rhodium Used For?
Recovered metals go into new catalytic converters, electronics, chemical catalysts and jewelry, so the same atoms can serve several vehicles over time. Johnson Matthey estimates that open loop recycling, mostly from scrapped converters, supplies about 20 percent of platinum and about 30 percent of both palladium and rhodium.
Catalytic converter recycling is also price sensitive. When metal prices fell from 2022 to 2024, scrap yards held back spent converters and recycled supply dipped. Johnson Matthey’s May 2026 report forecasts double digit growth in autocatalyst recycling for 2026 after that slow stretch.
How Much Is a Scrap Catalytic Converter Worth in 2026?
Most scrap converters from ordinary cars sell for about $50 to $250, although grades range from $5 for aftermarket units to more than $1,000 for the richest factory units. The payout depends on the assayed or graded platinum, palladium and rhodium content, not on size or weight.
The table below shows one buyer’s guideline quotes from October 9, 2026, so treat it as a snapshot rather than a promise. Your own quote depends on serial numbers, condition and the buyer.
| Converter grade | Guideline price per unit | Typical source |
|---|---|---|
| National average | $103.30 | Blend of all grades |
| Regular domestic | $20 to $133 | Domestic cars |
| High grade domestic | $68 to $618 | Select domestic cars with richer loading |
| Small foreign | $30 to $225 | Smaller import cars |
| Medium foreign | $40 to $450 | Mid size import cars |
| Large foreign | $90 to $454 | Larger import models, including some Honda and Toyota units |
| Torpedo | $110 to $1,150 | Larger Ford vans and trucks |
| Diesel | $15 to $508 | Diesel engines |
| Aftermarket | $5 | Replacement units, often with a silver plate |
Why Do Two Similar Looking Converters Pay Different Amounts?
The value sits in the invisible washcoat, not in the steel. OEM units carry more precious metal than aftermarket units, diesel and gasoline units differ, and hybrids can carry higher loads. Age, heat damage and washcoat condition also change what an assay finds.
Ceramic porosity, washcoat thickness, coating technology and the emissions standard in force when the converter was built all play a part. That is why, in catalytic converter recycling, a serial number and a clear photo usually get a better quote than a guess based on size.
Here is a typical scenario, not a specific customer: two converters come off two sedans of similar size in the same week, and both look like rusty steel cans. One is the factory original from a hybrid with 150,000 miles, and the other is an aftermarket replacement installed a few years earlier. The shop sends photos and serial numbers to a buyer. The factory unit prices at several hundred dollars because its washcoat held a heavy metal load, while the aftermarket unit gets a flat quote of about $5. Same shape, same weight, very different payout, which is why the stamp matters more than the size.
Do Spot Metal Prices Decide What You Get Paid?
Spot prices influence payouts but do not set them directly. Spot prices apply to fully refined metal, so the metal inside your converter is valued after processing fees and refining costs. On October 9, 2026, one buyer listed platinum at $1,625, palladium at $1,113 and rhodium at $8,400 per ounce.
A converter holds only a few grams of metal, so catalytic converter recycling pays for a small fraction of an ounce, and the refined value is a small fraction of an ounce. Treat the spot price as a signal for the market direction, then rely on a graded quote for your actual unit.
How Can You Recycle a Catalytic Converter Legally?
Sell only to a licensed scrap dealer, vehicle recycler or toll refiner, and bring photo ID plus proof that the converter came from a vehicle you own. Many states also require the vehicle’s VIN, written records and traceable payment instead of cash. Rules differ by state, so confirm with the buyer before you go.
Several routes exist if you want to recycle catalytic converter parts, and each suits a different situation:
| Option | Best for | What to expect |
|---|---|---|
| Local scrap yard | One converter and a same day sale | Grading by stamp or sight, with prices that vary by yard |
| Auto recycler or dismantler | Whole vehicles being scrapped | The converter is handled as part of the vehicle recycling process |
| Dedicated converter buyer | Higher grade units with serial numbers | Photos, serial numbers and proof of ownership requested before a quote |
| Toll refiner or processor | Large lots | Payment based on assay, with a detailed report, and sometimes minimum batch sizes |
| Your repair shop | Converters replaced during a repair | Shops often sell removed units to recyclers, so ask who keeps the part |
What Paperwork Will a Buyer Ask For?
Expect to show government photo ID and proof of ownership such as a title, registration or bill of sale. Many buyers also record the source vehicle’s year, make, model and VIN, and some states require a signed statement of lawful ownership or a delay before payment.
Call ahead and ask what your buyer needs before you recycle catalytic converter units at their yard. Keep your receipt afterward as proof of a legal sale.
Does Federal Law Control Catalytic Converter Sales?
Most rules on buying and selling used converters are set by states rather than the federal government. A federal bill, the PART Act, was introduced in 2025 to create criminal penalties for trafficking stolen converters, but you should check its current status and your own state’s rules before selling.
Because laws on catalytic converter recycling change and differ from state to state, treat any summary as a starting point and verify requirements with your state or local authorities.
Is Catalytic Converter Recycling Good for the Environment?
Yes. Catalytic converter recycling returns scarce platinum, palladium and rhodium to the supply chain without opening new mines, and it keeps the steel and ceramic in productive use. Recycling also takes less energy and fewer resources than primary production, which is why industry treats converters as an urban mine.
The benefit of catalytic converter recycling depends on converters actually reaching processors. Licensed yards, documentation rules and fair grading keep stolen and improperly handled units out of the legitimate stream.
Can You Recycle Catalytic Converter Material at Home?
No. Metal recovery needs milling, homogenizing, sampling and refining equipment that only professional processors have, and the chemistry is not safe for a garage. Cutting a converter open at home also destroys the serial numbers and shape a buyer uses to grade it, which usually lowers your quote.
You cannot recycle catalytic converter metals in a garage in any useful way. Leave the unit intact, photograph it, and let a licensed buyer handle the rest.

James Mitchell
Senior Automotive Writer
12+ years writing clear, practical guides on vehicle maintenance and emissions systems.
Frequently Asked Questions
Conclusion:
Catalytic converter recycling turns a worn exhaust part into reusable platinum, palladium and rhodium, and the payout depends on grade, not weight. Before you sell, find the serial number, photograph the intact unit, gather your title or registration, and collect quotes from at least two licensed buyers. Never cut the converter open yourself, and check your state’s rules before the sale so the transaction stays legal.
